FRONIUS TRANS-POCKETP180 Inverter welder

FRONIUS TRANS-POCKETP180 Inverter welder

Product no.:
Delivery Estimator Delivery Estimator is only available for products which can be added to the shopping basket.
The new generation of TransPocket 150/180 devices brings a high degree of flexibility. The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads of up to 100 m in length. The operating concept has also become even more intuitive. A 7-segment display makes it possible to quickly read off the parameters that have been configured. In addition, the display is slightly set back and therefore well protected against damage. Easily comprehensible setup settings are a tremendous help in simplifying operation.


Welding current / Duty cycle [10min/40°C] 180A / 35%
Welding current / Duty cycle [10min/40°C] 160A / 60%
Welding current / Duty cycle [10min/40°C] 120A / 100%
Operating voltage 20,4V - 27,2V
Open-circuit voltage 101,0 V
Mains frequency 50-60Hz
Mains voltage 230V
Mains fuse 16A
Dimension / b 160,0 mm
Dimension / l 435,0 mm
Weight 8.8 kg
Degree of protection IP23


The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).


If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.


To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.
Browse this category: MMAW - ARC WELDING INVERTERS